• This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #6252
    Anonymous

      I was installing an SSB antenna tuner on my 2007 Bav 37 up inside the starboard lazzarette hatch to the transom and noticed that there are no nuts or washers on the backstay plate bolts inside the transom – I don’t know but this doesn’t seem right to me and I’ll fit my own. But I was wondering if other boats are the same.

      Bob

      #7797
      Anonymous

        had a look no nuts and washers will do the same as a precaution
        johnd

        #7864
        Anonymous

          Our 37 has no nuts inside on the hull also. The backstay brackets are just screwed into plates moulded into the transom. I have put s/s washers and nuts on from the inside, just in case. Also I have used monel wire to secure all the backstay shackles. I’m surprised Bavaria have not at least used a plastic tie. Regards

        Viewing 3 posts - 1 through 3 (of 3 total)
        • The forum ‘Bavaria 37’ is closed to new topics and replies.