• This topic is empty.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #6703

      I have a light flashing on my panel indicating the holding tank is 3/4 full – it isn’t.
      I can’t find anything from Bavaria on the use of wc and holding tank or troubleshooting.It’s presumably an electrical fault.

      Any ideas or experiences before I embark on taking the whole damn thing to pieces?

      Thanks in anticipation of keeping me out of the s**t.



        Not taking th p*** – have you tested the electrical conection for a short?

        Alternately has the sender unit got “wedged” by some floating debris?

        Try closing the cock and filling the tank with fresh water before taking the boat ‘around the block – to shake things up.
        Empty out the contents and with any luck you make have cleared it.

      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.