• This topic is empty.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • December 10, 2012 at 10:12 am #6762
    Anonymous

      Hi there
      My immersion heater has blown having stupidly drained the fresh water. The boat is on the hard and fortunately the yard mains fuse tripped out.
      Any advice appreciated. I have read about a trip pin which I am hoping will have saved the element. However the manual does not give
      any indication of make the water heater is or where I can get parts from?

      Many thanks in advance.

      Richard
      Walser

      December 19, 2012 at 2:06 pm #9311
      Anonymous

        Good news- It seems that Graham@penguineng.com at Penguin Engineering- Hayling Island supply ATI calorifiers and spares.

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.
      Read more articles