• This topic is empty.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #6872
    Anonymous

      Hello,

      I have just recently purchased a Bavaria 46 Cruiser and would like to install an inner forestay.

      I am just having trouble trying to determine where the anchoring on the deck is located. I have been told that there is a backing plate for this however I cannot locate it at the moment.

      Any assistance would be greatly appreciated.

      Regards
      Craig

      #9670
      Anonymous

        Hi Craig
        The backing plate is normally built into the deck where the pad eye would be fitted for the spinnaker downhaul. If you have no pad eye fitted you will see a flat area on the deck just in front of the forward hatch, directly below this within the deck is a 6 or 8mm thick aluminium plate that can be drilled and tapped to take the fixing. Not sure if they are designed to take a forestay load though but a spinnaker downhaul loads up significantly so you should be alright.
        Regards
        Rick

      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.