• This topic is empty.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #6259
    Webmaster
    Participant

      Help.
      I have an intermittant problem when reversing.
      Reverse gear engages but on occasion the engine will not rev in reverse. Particularly worrying as you are heading for the end of a finger pontoon.
      The problem never seems to arise when the engine is in neutral.
      Grateful for any ideas or guidance.

      Kevin Hall.
      Levanter

      #7800
      Webmaster
      Participant

        Hi Kevin

        Andrew here from Clipper Marine.

        It could be low idle problem, you should be idling at around 600-700 rpm. A good way is to disconnect the throttle and gear cables and adjust by hand. it could be as you are putting it into gear it doesn’t have enough tick-over to drive it in gear so simply just adjust the low idle.

        Any problems give me a call at Clipper Marine (Bavaria Dealers) 02380 605060

        Andrew

      Viewing 2 posts - 1 through 2 (of 2 total)
      • The forum ‘Bavaria 32’ is closed to new topics and replies.