• This topic is empty.
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #6831
    Webmaster
    Participant

      I need to know urgently if the shaft coupling on my ocean 47 is full length or half length. I can’t get to the boat to look. The engine is a VP TMD22 with mechanical gearbox and shaft drive.

      #9591

      I’ve got a 49 with the same engine and drive, so if you give me a clue what I’m looking for, I’ll take a look when I’m on the boat later today and upload a photo for you.

      #9592
      Webmaster
      Participant

        I probably saw your post too late. Where the shaft joints the gearbox here is the coupling – probably a bit rusty by now. If there are only 2 fixing bolts side by side its a half coupling – if 3 or 4 bolts its a full coupling. Thanks for the interest Chris

        #9593

        Ok, just looked, and mine has 3 bolts (with Allen Key heads) each side.

        Hope that help

        Bob

        #9594
        Webmaster
        Participant

          thanks – that indicates its a full coupling. Now I know.

        Viewing 5 posts - 1 through 5 (of 5 total)
        • You must be logged in to reply to this topic.