- This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
I have fitted a 12V socket onto my B31. I want to wire the socket through the switch panel, and intend to use the unused switch & wiring for the anchor windlass (because I don’t have one).
The wiring diagram in my handbook is of very poor quality and I can’t read it. Would I be correct in saying that I can wire the socket up by connecting the +ve terminal of the 12V socket to the switch, and the -ve terminal of the 12V socket to one of the busbars?
Alastair
Alastair
Yes – that’s exactly the way to do it.
Roger
Thanks Roger. I just wanted a second opinion before going ahead.
Alastair
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
